Thermo Fisher Scientific CyberScan CON 510 User Manual
Con 510, Instruction manual
Advertising
Table of contents
Document Outline
- 0
- 1 INTRODUCTION
- 2 DISPLAY AND KEYPAD FUNCTIONS
- 2.1 Display
- 2.2 Keypad
- 3 PREPARATION
- 4 CALIBRATION
- 4.1 Important Information on Meter Calibration
- 4.2 Preparing the Meter for Calibration
- 4.3 Calibration with Conductivity Standards and TDS factor
- 4.4 Calibration for TDS Standards Directly
- 4.5 Selection of Automatic or Manual Calibration
- 4.6 Automatic Calibration (Only for Conductivity)
- 4.7 Manual Calibration (Conductivity/TDS)
- 4.8 Temperature Calibration
- 5 MEASUREMENT
- 6 MEMORY AND DATA INPUT FUNCTIONS
- 7 SETUP FUNCTIONS
- 8 PROBE CARE AND MAINTENANCE
- 9 TROUBLE SHOOTING GUIDE
- 10 ERROR MESSAGES
- 11 SPECIFICATIONS
- 12 ACCESSORIES
- EC-CON-1413BT
- EC-CON-1288BT
- EC-CON-2764BT
- EC-CON-447BS
- EC-CON-1413BS
- EC-CON-2764BS
- EC-CON-15000BS
- 13 NOTE: CONDUCTIVITY AND TDS SOLUTIONS HAVE ±1% ACCURACY AT 25°C ADDENDUM 1: CALIBRATION TIPS
- 14 ADDENDUM 2: CALCULATING TDS CONVERSION FACTORS
- 15 ADDENDUM 3: CALCULATING TEMPERATURE COEFFICIENTS
- 16 ADDENDUM 4: METER FACTORY DEFAULT SETTINGS
- 17 WARRANTY
- 18 RETURN OF ITEMS
- E-mail: [email protected]
- Web-site:
- www.4oakton.com