Thermo Fisher Scientific CyberScan 6000 Series Meters v.1 - Manual (Page 21)

9
Getting Started: 6000 Series Meters Connectors
PCD6500 meter
Technology Made Easy ...
Important: It is recommended to follow the following start-up and shut down procedures to avoid
crashes, lock-ups or data loss. Start and shut down procedures are also illustrated on the slip
attached with the adaptor cable.
Start-up procedure:
1. Connect the 9V DC power jack of the adaptor to the rear connector panel.
2. Connect 2 pin power plug into the power outlet or terminal strip.
3. Switch power on (wall socket or terminal strip).
4. Press the black button on the base of the meter for 5 seconds.
5. Release the button to power on the meter.
Shut down procedure:
1. Close all applications and log off.
2. From the HOME screen tap the bottom edge of the screen to bring up the Task bar.
3. Tap Start>Shut down. This launches Shut down window.
4. Tap the Yes button on Shut down window to power off the meter.
Caution: Do not remove power from your 6000 series meter until the meter shuts down.
Getting Started: Startup and Shut down procedures
PH6000, PC6000, PH6500, CON6000, PC6500 and PCD6500 meters