Thermo Fisher Scientific CyberScan 6000 Series Meters v.1 - Manual (Page 25)

13
Getting Started: Conductivity Cells
PC6000, CON6000, PC6500 and PCD6500 meters
Technology Made Easy ...
The 6000 series meter – PC6000, CON6000, PC6500 and PCD6500 - allows you to use two
types of conductivity cells: the 2-cell conductivity cell and the 4-cell conductivity cell with DIN
connector. Only one type of conductivity cell can be connected at
a time.
1. Carefully remove the protective cover from the end of
the conductivity cell. Before using your conductivity cell,
soak it for 5 to 10 minutes in distilled or deionized water.
2. Connect the 2-cell or 4-cell conductivity cell to the
conductivity cell jack. The 2-cell and 4-cell
conductivity cells have built in ATC probes. Therefore,
there is no need to connect a separate ATC probe.
3. Rinse and blot-dry (don't wipe) probe between each measurement. Rinse probe with
distilled or deionized water, or a portion of the next solution to be measured.
4. Between measurements, conductivity probes can be stored dry.