Body style versus application, Way valves – Warren Controls 5800 Series Compact Globe Control Valves User Manual
Page 6
6
2600 Emrick Blvd • Bethlehem, PA 18020 • USA • 800-922-0085 • www.warrencontrols.com
5800_IOM_RevB_0413
BODY STYLE VErSUS APPLICATION
5840
2-Way Single Seat Unbalanced Valve
with Cage Retained Seat
The 5840 Valve is particularly effective for the control of liquids, gases,
and steam. It is a suitable solution for applications with dirty fluids and
high pressure drops. ANSI Class IV and VI shut-off.
Sizes:
1/2, 3/4, 1, 1-1/2, 2, 2-1/2, 3, 4 inch
Body:
WCB Steel or CF8M Stainless Steel
300 NPT or 300 Socketweld (1/2 thru 2),
150LB Flange or 300LB Flange (1/2 thru 4)
Trim:
EQ% or Linear, 316 Stainless Steel, TFE, PEEK, or Alloy
6 Wrapped 316 SS, 400 Stainless Steel,
Alloy 6 Wrapped 400 SS
Shut-off:
ANSI Class IV (Stainless Steel and Alloy 6 Trim),
ANSI Class VI (TFE and PEEK Trim)
Packing &
TFE V-Ring, Spring Loaded, w/ PEEK Bearings (+32
Bonnet:
to 450°F), TFE V-Ring, Spring Loaded, w/ Z PEEK
Bearings (+32 to 450°F), Adjustable Graphite
w/ PEEK Bearings (+32 to 450°F), Adjustable
Graphite w/ Z PEEK Bearings (+32 to 450°F),
Adjustable Graphite w/ Graphite Gaskets & Alloy
6 Bearings (+32 to 550°F), Adjustable Graphite
w/Graphite Gaskets, Graphalloy Bearings &
Extension Bonnet (+32 to 750F for NON-Oxidizing
Media ONLY) Adjustable Graphite w/ Graphite
Gaskets, Alloy 6 Bearings & Extension Bonnet (+32 to
800°F), Suitable for Oxidizing Media
Note: PEEK Bearings are best suited for chemical
applications. Z-PEEK Bearings are best suited for
water and steam applications.
Temperature: +32 to 450°F (TFE or PEEK Trim)
+32 to 800°F (Stainless Steel or Alloy 6 Trim)
Rangeability: 50:1
5843
2-Way Single Seat Caged Balanced Valve
with Cage Retained Seat
The 5843 is a balanced valve that is an effective solution for the control
of liquids, gases, and steam at higher pressures. It requires less force
to operate than unbalanced valves so smaller actuators can be used.
Its single seat o-ring seal design facilitates ANSI Class IV shut-off. It is
limited to cleaner fluids.
Sizes:
2-1/2, 3, 4 inch
Body:
WCB Steel, CF8M Stainless Steel
150LB Flange or 300LB Flange
Trim:
EQ% or Linear, 316 Stainless Steel, 400 Stainless Steel,
Alloy 6 Wrapped 400 SS
Shut-off:
ANSI Class IV (Fluoraz Seal) ANSI Class III (Metal Seal)
Packing &
TFE V-Ring, Spring Loaded, w/ PEEK Bearings and
Seal Bonnet: Fluoraz (+32 to 450°F), TFE V-Ring, Spring Loaded,
w/ Z PEEK Bearings and Fluoraz Seal (+32 to 450°F),
Adjustable Graphite w/ PEEK Bearings and Fluoraz
Seal (+32 to 450°F),
Adjustable Graphite w/ Z PEEK Bearings and Fluoraz
Seal (+32 to 450°F), Adjustable Graphite w/ Graphite
Gaskets & Alloy 6 Bearings and Fluoraz Seal (+32 to
450°F), Adjustable Graphite w/ Graphite Gaskets,
Graphalloy Bearings Metal Seal & Extension Bonnet
(+32 to 750F for NON-Oxidizing Media ONLY)
Adjustable Graphite w/ Graphite Gaskets, Alloy 6
Bearings Metal Seal, & Extension Bonnet (+32 to
800°F)
Note: PEEK Bearings are best suited for chemical
applications.
Z-PEEK Bearings are best suited for water and steam
applications.
Temperature: +32 to 800°F (Stainless Steel or Alloy 6 Trim)
Rangeability: 50:1
2-WAY VALVES
(Control of Liquids, gases, and Steam)