Agilent Technologies N1022A - Manual (Page 11)

7
Connecting the N1022A
Figure 1. Probe Channel Dialog Box
6 Click Close. You can now change the probe tips or probe attenuation. You can
also perform a probe calibration. You can access information about probe
attenuation and probe calibration in the Infiniium DCA Help system.
Using modules with 2.4 mm electrical input
The N1022A can be directly connected to any 86100-series or 83480-series with a
3.5 mm electrical channel input. You can also connect the probe adapter to a module
with 2.4 mm electrical input. However, in order to connect to a 2.4 mm input, you must
use a 2.4 mm(F) - 3.5 mm (M) adapter, Agilent part number 85130-60010.