Amerex 05614 - Manual (Page 9)

8
1
Connect hose coupling to outlet on
the extinguisher. Lay hose straight
on ground to its full 50 ft. length.
Start first regular loop counter-
clockwise by placing between side
brackets and over the top bracket.
2
The second loop is a REVERSE
loop. Notice that the hose passes
behind the loop on this reverse
loop.
If instructions are
followed, the hose will uncoil
without kinks.
3
The next loop is a regular "hose in
front" loop. Succeeding loops are
alternated: reverse, front, reverse,
etc. for six full loops.
4
Adjust the loops so that the nozzle
fits into the nozzle mount. Loops
should be approximately the same
size.
Gui
de
to P
rope
r I
nsta
ll
a
tion of Ho
s
e
on
W
hee
le
d or
Sta
tiona
ry
Fir
e
Ex
tinguis
h
e
rs