Amerex 05619 - Manual (Page 9)

8
MOUNTING INSTRUCTIONS
For
Hose and Extension Applicator
Model 571/B571
Extinguisher Installation
Step 1
Install the hose into the Valve
Assembly. Loop the hose as
shown.
Step 2
After looping the hose, snap the
Extension Applicator into both
clips with the bottom of the rubber
handle grip resting on the top clip.
Place the extinguisher into the
model 589 dolly and fasten the
rubber "bungee" straps around
the cylinder. Install the hose and
extension applicator into both
clips as instructed above (steps 1
& 2). DO NOT INSTALL THE
RUBBER STRAPS OVER THE
HOSE & APPLICATOR.