Badger Meter ORION AMR/AMI Hardware Solutions for Gas Utilities - Manual (Page 10)

5 Tap ORION Field Application to start the software
Result: The clock Verification screen opens as shown
in Figure 6.
Figure 5: ORION Field Application
6 Verify that the date and time shown on the screen
are correct
If the date and time are correct, tap Ok and continue
with Step 8
IMNOOTAO I
The date and time on the handheld must be
accurate to ensure communication with
ORION endpoints.
If the date or time need to be adjusted, tap the time
shown in the top tool bar
Result: The Settings tool bar is displayed below the top
tool bar.
7 Tap the Clock icon as shown in Figure 7
Result: The clock & Alarms screen opens.
Figure 6: Verify date and time
Figure 7: Settings: clocks & Alarms Figure 8: Adjust date and time
Adjust the time zone, date and/or time, as needed
When finished, tap OK.
PROgRAM STARTuP ANd ExIT
Page 10 April 2014 ORION® Field Application for Trimble® Ranger 3