Bookmark an account – Badger Meter ORION AMR/AMI Hardware Solutions for Gas Utilities User Manual
Page 19
Bookmark an Account
The software has a feature which allows you to bookmark an account Bookmarks make accounts easier to find later
To bookmark an account, press the B key twice (BB) or press
Fn + B on the keypad while on the account read screen A
bookmark label (BkMk) displays at the top left of the screen as
shown in Figure 20
NOTE:
N
Pressing BB on the keypad again while on the account
read screen clears a bookmark
Search Bookmarked Accounts
Accounts that have been bookmarked can be searched
See
for complete information on
searching accounts
Figure 20: Bookmarked account
Capturing Meter Readings
The ORION Field Application software captures meter readings in one of three ways:
•
ORION RF read
•
VersaProbe touch pad read
•
Manually keyed read
Figure 21: Reading display field
The meter reading displays on the account read screen When reading in Manual mode, the reading display field is blank until
the meter reader enters the reading When reading in Auto mode, the field fills and the display automatically advances to the
next account when a reading is received
If the meter reading is high or low, the handheld sounds an alarm, displays the condition and may or may not request further
action depending on the settings
ORION RF Reads
When an ORION endpoint sends a reading, one of several results can occur
•
The handheld receives a transmission and stores the reading If the meter was displayed on the screen, the display
advances to the next customer account record (Auto mode)
•
The handheld receives a transmission that reports an alert such as a tamper or a potential leak For a potential leak,
the handheld logs the condition and stores a read For a tamper, the handheld sounds an audible alert and prompts
you to process the tamper before advancing to the next account
•
No transmission is received from the ORION endpoint Try moving closer to the meter or tap Next to skip the meter
Common reasons for not receiving a reading include:
•
Incorrect endpoint serial number
•
Handheld is out of range of the endpoint
•
Endpoint has not been started
•
Handheld time and/or date is not correct
•
Endpoint serial number is not loaded into
the handheld
•
The line of site between the handheld and the
endpoint is obstructed
ORION Migratable endpoints (and ORION Fixed Network endpoints in mobile mode) are capable of two-way communication
with the ORION ME FHSS mobile transceiver In addition to the current reading, additional two-way communication
functionality is accessible via the Work Items button on the account read screen as described at
REAdINg A ROuTE
Page 19
April 2014
ORION® Field Application for Trimble® Ranger 3