American DJ 150/RG - Manual (Page 2)

© American DJ Supply ® - www.americandj.com - Color 150/RG™ Instruction Manual Page 3
• Micro-Stepping Motors for Smooth Color and Gobo Transitions
• 100% Dimmable
• DMX-512 Protocol Compatible
• Uses Three DMX Channels
• Full Focusing
• Fan Cooled
• Continuous Rotating Gobos
• 2 Changeable Gobos Plus Spot - (26mm Gobos - 20mm viewable)
• Seven Colors, plus White
• Master/Slave Operation
• Sound-Active
• Quick Change Gobo Slot
• Internal Microphone
• Volume Sensitivity Knob
• Easy Lamp Replacement
• Long Life ZB-JCR H5 (15v/150w) Lamp - 500 Hours
• Optional MINI/C Blackout Controller
Color 150/RG™ Features
The Color 150/RG™ carries a one year (365 days) limited warranty.
Please fill out the enclosed warranty card to validate your purchase.
All returned service items whether under warranty or not, must be
freight pre-paid and accompany a return authorization (R.A.) number.
If the unit is under warranty, you must provide a copy of your proof
of purchase invoice. Please contact American DJ
®
customer support
for a R.A. number.
Color 150/RG™ Product Registration
• This unit may blow a fuse if the maximum allotted load of 3 amps is
reached. If the fuse needs replacement, always replace the fuse with
same exact type that was remove. Use of a different type fuse from
that which is recommended may cause fire or electric shock and will
void the manufactures warranty
•
To reduce the risk of electrical shock or fi re, do not expose this unit
rain or moisture
•
Do not spill water or other liquids into or on to your unit
• Be sure that the local power outlet match that of the required voltage
for your unit
•
Do not attempt to operate this unit if the power cord has been frayed
or broken
•
Do not attempt to remove or break off the ground prong from
the electrical cord. This prong is used to reduce the risk of electrical
shock and fi re in case of an internal short
•
Disconnect from main power before making any type of connection
• Do not remove the cover under any conditions. There are no user
serviceable parts inside
•
Never operate this unit when it’s cover is removed
• Never plug this unit in to a dimmer pack
• Always be sure to mount this unit in an area that will allow proper
ventilation. Allow about 6” (15cm) between this device and a wall
•
Do not attempt to operate this unit, if it becomes damaged
• This unit is intended for indoor use only, use of this product outdoors
voids all warranties
•
During long periods of non-use, disconnect the unit’s main power
• Always mount this unit in safe and stable matter
• Power cords should be routed so they are not likely to be walked on,
pinched by items placed upon or against them.
• Cleaning -The fixture should be cleaned only as recommended by
the manufacturer. See page 7 for cleaning details
Color 150/RG™ Safety Precautions
© American DJ Supply ® - www.americandj.com - Color 150/RG™ Instruction Manual Page 4
• Heat -The appliance should be situated away from heat sources
such as radiators, heat registers, stoves, or other appliances
(including amplifiers) that produce heat.
•
The fixture should be serviced by qualified service personnel when:
A. The power-supply cord or the plug has been damaged.
B. Objects have fallen, or liquid has been spilled into the unit.
C. The unit has been exposed to rain or water.
D. The unit does not appear to operate normally or exhibits a
marked change in performance.
To optimize the performance of this product, please read these operat-
ing instructions carefully to familiarize yourself with the basic operations
of this unit. These instructions contain important safety information
regarding the use and maintenance of this unit. Please keep this
manual with the unit, for future reference.
Color 150/RG™ General Instructions Color 150/RG™ Safety Precautions