Dwyer PUX User Manual
Portable type ultrasonic flowmeter, Bulletin f-68, Instruction manual dwyer instruments, inc
Advertising
Table of contents
Document Outline
- PREFACE
- CONTENTS
- 1. OVERVIEW
- 2. CHECK OF DELIVERED ITEMS
- 3. NAME AND EXPLANATION OF EACH PART
- 4. POWER UP
- 5. WIRING
- 6. INPUT OF PIPING SPECIFICATIONS
- 6.1 Display of pipe setup screen
- 6.2 Entry of site name (measurement is possible without entry)
- 6.3 Outer diameter of piping (unit: mm)
- 6.4 Piping material
- 6.5 Wall thickness (unit: mm) (range: 0.01 to 100.00mm)
- 6.6 Lining material
- 6.7 Lining thickness (unit: mm) (range: 0.01 to 100.00 mm)
- 6.8 Kind of fluid
- 6.9 Selection of sensor mounting method
- 6.10 Kind of sensor
- 6.11 Transmission voltage
- 7. MOUNTING OF DETECTOR
- 7.1 Selection of mounting location
- 7.2 Selection of detector
- 7.3 Use of surface-treated accessories
- 7.4 How to mount small size (standard) sensor and small outer diameter sensor to pipe
- 7.5 How to mount large size sensor
- 7.6 How to mount high temperature sensor to pipe
- 7.7 How to mount medium diameter sensor to pipe
- 7.8 How to fold gage paper
- 8. MEASUREMENT
- 9. SETTING OPERATION (APPLICATION)
- 9.1 How to use SITE SETUP function (SITE SETUP page)
- 9.1.1 PARAMETER MEMORY: when registering data which are set
- 9.1.2 ZERO ADJUST: when performing zero adjustment
- 9.1.3 RESPONSE SET : when changing output response
- 9.1.4 OUTPUT CORRECTION: when calibrating measured value
- 9.1.5 CUT OFF: output cut off at low flow rate
- 9.1.6 TOTALIZE: when performing the integration process of measured data
- 9.2 Setting of logging function (data logger page)
- 9.3 Setting of system (page title: SYSTEM SETUP)
- 9.4 Setting of analog input/output (analog page)
- 9.5 Use of printer function (PRINTER page)
- 9.6 System check function (SYSTEM CHECK page)
- 9.1 How to use SITE SETUP function (SITE SETUP page)
- 10. MAINTENANCE AND CHECKUP
- 11. ERROR AND REMEDY
- 12. SPECIFICATIONS FOR SERIAL TRANSMISSION (RS-232C)
- 13. HOW TO USE PRINTER
- 14. REPLACEMENT OF BUILT-IN BATTERY
- 15. APPENDIX