Dwyer PUX2 - Manual (Page 21)

-19-
6. Measurement
Click the “MEASURE” button on the Menu screen, and the following screen appears.
Fig. 6-1 MEASURE screen
x First, select instantaneous trend value from [FLOW RATE], [FLOW RATE%], [VELOCITY], [THERMAL FLOW],
[THERMAL FLOW%], [ANALOG INPUT1], [ANALOG INPUT2], [FEEDING TEMP], [RETURNING TEMP] and
[DIFFERE
NTIAL TEMP].
x Up to 2 instantaneous values can be selected.
x Click the [SCALE SETTING] button to set [Max.] and [Min.] of Y scale and [Cycle] and [Point] of X scale. Press the
[Setting] button to reflect the setting.Press the [Cancel] button to cancel the setting. When setting is not made, the initial
value is reflected.
Fig. 6-2 Scale setting screen
Bulletin F
-9-PUX2-S