AT&T Mirage CIB 3144 - Manual (Page 2)

FCC REGISTRATION INFORMATION
In compliance with FCC Rules and Regulations, Part 68, you are advised that:
1.
2.
3.
Before installing your headset, you must notify the owner of the host equipment (i.e.,
leasing company). Provide them with the headset registration number. The registration
number is printed on the headset registration label.
If the installation of your headset requires the installation of a headset jack/JackSet® that
connects to the internal wiring of leased telephones or other devices, such connections can
only be made with permission of the owner of the host equipment.
In case of trouble, disconnect your headset to determine the trouble source. If the headset
is the source, modifications or repairs can only be made by the headset manufacturer or its
authorized representatives.
WARRANTY
All terms and conditions in your agreement with AT&T apply. For warranty and non-warranty
service of this product, Plantronics, Inc. acts solely as a service agent for AT&T and any claims
are to be made solely with Plantronics.
SERVICE INFORMATION
Should you encounter difficulties or be uncertain about proper installation, please follow the
procedures below:
● Replace the faulty headset with a working headset. If the problem persists, the problem is
probably not in the headset, but in the equipment to which it is connected.
● If the replacement clears the problem the trouble is in the headset.
Should your headset fail to operate properly, and you wish to obtain service under the
Warranty specified in your agreement with AT&T, please contact your AT&T representative.
When returning the headset for service, it is not necessary to include the amplifier.
TRADEMARK NOTICES
Mirage is a registered trademark of Plantronics, Inc.
JackSet is a registered trademark of Plantronics, Inc.
i