AT&T Mirage CIB 3144 - Manual (Page 4)

■
1
2
FIGURE 1
■
1
2
3
FIGURE 2
Adjusting the Clothing Clip
An AT&T headset will best serve you when it is properly
adjusted for comfort and clarity. Use the Clothing Clip to keep
the headset properly seated, free from the weight of the cord.
Attach the Clothing Clip to your clothing at a comfortable
level. To adjust the clip position, squeeze the cord retainer
and slide the cord through to provide sufficient slack so that
the headset is not disturbed by head movements. (Refer to
FIGURE 1)
Positioning Mirage®
Mirage has been designed to fit comfortably on either ear.
Before placing Mirage on your ear, position the receiver away
from your head. (Refer to
FIGURE 2)
Extend the voice tube approximately one inch.
Hold the Mirage capsule above your ear and against your
head, with the voice tube over your cheek and the cord behind
your ear. Then, slide Mirage downward behind the top
portion of your ear until positioned as shown. (Refer to
FIGURE 3)
Gently rotate the capsule back and forth until it rests securely
and comfortably on your ear.
Rotate the receiver and press it gently against the center of
your outer ear. (Refer to
FIGURE 3)
4
5
FIGURE 3
2