Audiovox Jensen Phase Linear UMP9020 - Manual (Page 5)

UMP9020
5
ULTRASERIES
AM/FM/CD/MP3/WMACASSETTE RECEIVER
UMP9020
/
MANU
SKIP
BAND
LOUD
7
9
8
WMA
CD- CD+ SHF RPT SCN PAU AMS
D-AUD
SCAN
MUTE
TAPE OPEN CLOSE CD OPEN CLOSE EJ
3 in 1 CD/MP3 CASSETTE RECEIVER
0
OPERATING INSTRUCTIONS
Power On/Off Button
Press the POWER button (1) to turn the unit on
and off when the vehicle ignition switch is on. If
the radio is off when the ignition switch is turned
off, the POWER button must be pressed to turn
the radio on after the ignition switch is turned
on. If the ignition switch is turned off while the
radio is on, the radio will come on automatically
when the ignition switch is again turned on.
Liquid Crystal Display Panel
The Liquid Crystal Display (LCD) panel displays
the frequency, time and all activated functions.
The display contains a color-coded graph that
provides a visual representation of the signal
level, represented by the number and amplitude
of the segments.
NOTE: It is a characteristic of LCD panels
that, if subjected to cold temperatures for an
extended period of time, they may take
longer to illuminate than under normal
conditions. In addition, the visibility of the
numbers on the LCD may slightly decrease.
The LCD read-out will return to normal when
the temperature inside the vehicle increases
to a normal range.
Volume Control
To increase or decrease the volume level, turn
the AUDIO ADJUST control (3). The volume
will increase/decrease and the level will be
shown on the display panel from a minimum of
“00” to a maximum of “100”. The display
automatically returns to the normal indication 5
seconds after the last volume adjustment or
when another function is activated. This knob is
also used to adjust the bass, treble, balance
and fader levels.
Audio Control (SEL)
Press the SEL button (4) twice to set the unit for
bass adjustment (“BAS” and the setting number
will momentarily appear on the display panel).
Press the button additional times to select
treble (TRB), balance (BAL), fader (FAD), and
volume (VOL). The display returns to the
normal indication 5 seconds after the last
adjustment or when another function is
activated. Turn the AUDIO ADJUST control (3)
to adjust the levels.
1
2
3 4
1
3
2
4