Milestone XProtect Professional 2014 - Manual (Page 172)

Milestone XProtect ® Professional
2014
Administrator's Manual
www.milestonesys.com 172 Advanced configuration
You can remove video push channels you do not require. To do so, select the relevant channel and
click Remove in the bottom right corner.
Add a Video push driver as a hardware device
If you add a Video push channel, you must add the Video push driver to your Management
Application/Management Client. To do so:
1. Open the Add New Hardware Wizard in your Management Application/Management Client.
2. Choose the Manual option. The Video push driver will not be detected in automatic hardware
searches.
3. Specify hardware device settings (see "Add hardware devices settings" on page 172) and
select the hardware driver manually.
4. Once finished, your Video push driver must be associated with your Video push channel. To
do so, return to your Mobile server > Video Push tab and click Find Cameras.
Add hardware devices settings
Specify the following settings when you add a Video Push driver in the Add Hardware Devices
wizard:
Name Description
Use:
Select if the Video push driver should added to the XProtect video
management system.
Address: Type in the Milestone Mobile server IP address.
Port:
Type in the port number for your Video push driver. The default
port is 80. The port is for communication between the Milestone
Mobile server and your XProtect server.
Important: The port number you set must be identical with the
port number you set when you specify your Video push settings
(see "Video Push" on page 174). If the port numbers are not
identical, your Video push channel will not work.
User name:
Select the same user name as associated with the Video push
channel when you added (see "Add a Video push channel" on
page 171) this.
Password:
Type in the password for the Video push driver. The password for
your Video push driver is Milestone (this cannot be changed).
Hardware Driver:
Select the Video push driver.
Verified:
Select if the Video push driver runs on a secured HTTPS
connection.
Once finished, go back to your Milestone Mobile server > Video Push tab and click Find Cameras to
finish setting up the Video push channel.