Milestone Analytics 2.2 BOSCH VCA - Manual (Page 13)

12
8. Click the Add new MAC link to register the MAC address
of the computer on which you are installing the
XProtect Analytics software.
Where do you find the MAC address? A MAC
address is a 12-digit hexadecimal number (example:
0123456789AF), also called the computer’s Physical
Address. To find a computer’s MAC address do the
following: Click Start > Run. Type cmd in the Open field
and click OK. Write ipconfig /all at the command
prompt. Find the Physical Address. When you write the
MAC address omit all hyphens: The MAC address 01-
23-45-67-89-AF must be written as 0123456789AF
during the registration.
9. Type the computer's MAC address (without hyphens) in
the first field. Then type a description in the second
field (for example the computer's IP address, physical
location or user).
10. Click the Submit button.
11. When asked whether you want to add the device’s MAC
address to the SLC, click OK.
12. Click the Get all keys via email link to have your CLK
sent to you by e-mail.
13. Click the Logout link to log out of the Software
Registration Service Center.
Installing the Analytics Software
To install the Milestone XProtect Analytics Software, do the
following:
1. Insert the XProtect Analytics software DVD, and click
Install XProtect Analytics Server. Alternatively, if you
downloaded XProtect Analytics from the internet, locate
and double-click the file Analytics.Installer.en-US.msi.
After a short while the XProtect Analytics setup wizard
opens. Click Next to begin the installation process.