Milestone Analytics 2.2 BOSCH VCA - Manual (Page 8)

7
XProtect Transact version 2.5c or later is required for
integration with XProtect Analytics.
If you require information about how to install XProtect
Transact, refer to the XProtect Transact Administrator’s Manual
available on the XProtect Transact software DVD as well as
from www.milestonesys.com.
When XProtect Transact is installed, do the following:
Configure XProtect Transact for Use with Your Analytics
Solution
You basically need to make XProtect Transact aware that a new
type of data—analytics data—is going to be used. You do this
by adding a so-called source:
1. Open the Transact Administrator application, select the
Sources tab, and click its Add New... button.
2. The New Source window opens.
 In the Source name field, type a descriptive
name for your type of analytics data.
 In the Source providers list, select Analytics
Transact Provider, then click OK.