Milestone M10 - Manual (Page 19)

Milestone Husky M10 Administrator’s Manual
www.milestonehusky.com 18
Figure 24: How to locate “Camera Settings”.
Configure Cameras
You can find the configuration options for your cameras by clicking on the Settings tab in the
upper right corner of the Home page and selecting “Cameras” from the dropdown menu
(Note: Only Administrative Users have access to this function). The number on the Settings
tab indicates the number of cameras connected to the Milestone Husky M10.
Once you are at the settings page you will see a list of all of your connected cameras. If a
camera does not show up, check to be sure that your system is properly connected (see the
Milestone Husky M10 Quick Start Guide). If all cameras are connected but one still does not
show up, see the Discovering Cameras section of this guide.