Milestone M10 - Manual (Page 23)

Milestone Husky M10 Administrator’s Manual
www.milestonehusky.com 22
Figure 30: Recording camera settings.
Figure 31: Recording dropdown menu.
Under the Recording settings tab you will find options to:
• Select when the camera records
• Select seconds to record before motion is detected.
• Select seconds to record after motion is detected.
• Select whether to record Audio (Not legal in all places)
• Choose how long the recordings are retained
• Check the disk usage
• Delete the current recordings
Because the Milestone Husky M10 is capable of motion detection, it is possible to set the
camera to record only when motion is detected. This option is found in the dropdown menu
labeled “ Recording.” Details about motion detection configuration are found in the following
section.
Recording