Audiovox FRS-3000PK - Manual (Page 12)

12
Base Station Transceiver Charging Setup For the Mobile Transceiver
When the mobile transceiver is equipped with rechargeable NiMH batteries
(supplied), they may be charged using the base station setup as follows:
1. Position the hand-held transceiver in the base station cradle as shown.
2. Connect the charging adapter plug to the DC 9V jack at the rear of the
base station transceiver.
3. Plug the other end of the charging adapter into a 120 VAC outlet.
4. On the base station, momentarily press the CHG button; the H indicator
lights red indicating the mobile transceiver batteries are being charged.
5. To terminate battery charge, momentarily press the CHG button again;
the H indicator will extinguish.
OUT OF RANGE
H
MON
SCAN
MODE
PTT
CHG
OUT OF RANGE
MOBILE TRANSCEIVER
EQUIPPED WITH
RECHARGEABLE
BATTERIES
CHARGING ADAPTER
PLUG
CHARGING (H)
LED INDICATOR
CHARGE (CHG)
ON/OFF BUTTON
AC WALL
CHARGING
ADAPTER
DESK TOP BASE STATION
WITH CHARGING FEATURE
MODEL RGD-4109500
(P/N F30ADP)
INPUT: 120 VAC
OUTPUT: 9 VDC