Milestone Smart Client 3.6 - Manual (Page 12)

Milestone XProtect Smart Client 3.6; User’s Manual
Installing the Smart Client
The Smart Client must be installed on your computer before you are able to use it.
Typically, you download the Smart Client from the surveillance system server, then install it on
your computer. Alternatively, your surveillance system administrator may ask you to install the
Smart Client from a CD (see page 13).
In some organizations, your surveillance system administrator will be able to install the Smart
Client on your computer through the network, in which case you will not have to perform any
installation yourself.
Download and Installation from Server
To download and install the Smart Client from the surveillance system server, do the following:
1. Verify that your computer meets the Smart Client’s system requirements (see page 11).
2. Open an Internet Explorer browser (version 6.0 or later), and connect to the surveillance
system server at the URL or IP address specified by your system administrator. When you
are connected to the surveillance system server, you will see a welcome page.
3. On the welcome page, select your required language in the menu in the top right corner.
Then go to the welcome page's Smart Client Installers section, and click the required Smart
Client language version link.
Example: Selecting welcome page language and required Smart Client language
version. Number of available languages may be different in your organization.
My welcome page is different, why? The illustration shows the type of welcome
page that most users are likely to see. Other versions of the welcome page also exist:
If you see this type of welcome page, go to the welcome page's XProtect Smart
Client section, and click the Download and Install XProtect Smart Client Locally
link.
If you see this type of welcome page, click the Install the XProtect Smart Client
link.
www.milestonesys.com Page 12 Installing the Smart Client