Noby UK Noby-65 - Manual

Noby-65 Installation Manual & Operating Instructions (Rev.1) Page 1 of 12
65
Intruder - Fire - Water
Combined Alarm
Installation Manual
and
User Operating Instructions
TABLE OF CONTENTS Page
First Power-Up 2
Power Supply Unit 3
Input & Detection Circuits 3
Output & Alarm Circuits 5
Keyswitch Options 6
Remote Signalling Equipment 6
Technical Specification 7
Connection Diagrams 8 -10
User Operating Instructions 11 -12
For your safety:
This equipment is to be installed, serviced and maintained by a suitably qualified
technical person with the requisite knowledge of electrical and fire safety installations.
The Noby-65 is intended to be permanently connected to the 230VAC house wiring via a
2A fused spur and in accordance with local wiring regulations.
Part of the internal circuitry operates at 230VAC and presents an electrical shock hazard.
Do not attempt to open, dismantle, repair or tamper with this equipment without first
disconnecting the 230VAC supply voltage.
This is Class-1 electrical equipment and must be earthed.
Please read this Installation Manual carefully and retain for future reference.