Norstat inc, Declaration of conformity – NORSTAT Non-Contact Safety Switches User Manual
Document Number : 340-400-IDv1
In the interest of product development specifications are
subject to change without notice.
It is the responsibility of the user to ensure compliance with
any acts or by-laws in place.
All information regarding Mechan equipment is believed to
be accurate at the time of printing. Responsibility cannot be
accepted for errors or omissions.
It is recommended to check the safe operation of the of the
switches and look for signs of damage or excessive wear
on a weekly basis. Damaged units should be replaced or
returned to the manufacturer for repair where practical.
Declaration of Conformity
We hereby declare that the products identified below conform to the relevant Essential Health & Safety Requirements of the European
Machinery Directive (2006/42/EC),EMC Directive(2004/108/EC) and other relevant EC Directives as listed below.
SCU-1 Safety Control Unit
HE-1 Safety Switches
HE-2 Safety Switches
HED Safety switches
BS EN60204-1:2006 – Safety of Machinery, Electrical equipment of machines. General requirements.
BS EN60947-5-3:1999 + AMD 1 04.2005 – Low voltage switchgear and control gear –
Part 5-3: Control circuit devices and switching elements – Requirements for proximity devices with defined behaviour under fault conditions.
BS EN60947-5-1:2004 – Low voltage switchgear and control gear –
Part 5-1: Control circuit devices and switching elements – electro- mechanical control circuits.
EN ISO 13849-1 : 2008 Safety of Machinery, Safety –related Parts of Control Systems
EN 62061 : 2005 Safety of Machinery,-- Functional Safety of Safety elated electrical ,electronic and programmable electronic Control
BS EN61000-6-4:2007 – EMC Generic emission standard. Industrial.
BS EN61000-6-2:2005 – EMC Generic immunity standard. Industrial.
EC-type examination No. 44 205 10 385597 Notified body 0044, TÜV NORD CERT GmbH, Langemarckstr. 20, 45141 Essen, Germany.
[ 2002/95/EC Restriction of the use of certain Hazardous substances (RoHs) ]
The overall machine must comply with the machinery directive. For further information please contact Mechan Controls Plc.
WA Boardman, Managing Director – July 2011
300 Roundhill Dr. Rockaway, NJ 07866
PH 973-586-2500, FX 973-586-1590