ADC Release 3.1 User Manual
Page 58
ADCP-70-220
•
Issue 1
•
November 2000
•
Section 2 Operation and Maintenance
Page 2-28
© 2000, ADC Telecommunications, Inc.
NTP-013
Page 1 of 1
CREATING CONNECTIONS
Summary: This procedure outlines the steps required to create ATM Virtual Path Connections
(VPC) and Virtual Channel Connections (VCC) through the Cellworx STN network. A VCC is
an individual channel between two communicating systems. The VPC allows multicasting of
several VCCs to ease routing between switches where multiple VCCs share a common path. The
VPCs are a common requirement of WAN installations. The administrator should have acquired
a work order defining the bandwidth requirements, service type, and Quality of Service (QoS)
for each connection before proceeding.
1.
Creating traffic contracts.
DLP-709
2.
Create an ATM VP or VC connection through the Cellworx
STN system.
DLP-708
3.
Create an ATM VP Multicast Connection.
DLP-787
4.
Create an ATM Bundled VC Multicast Connection.
DLP-790
5.
Add a Leaf Endpoint to an In-Service Connection.
DLP-791
Stop! You have completed this procedure.