PATLITE WDR-LE - Manual (Page 77)

75
Wireless Data Aquisition System Comprehensive User's Manual
4
Click the [Change Settings] button.
➡ The [Change Settings] dialog box opens.
5
Change the Settings.
Pan ID ：Set the PanID
Group ID ：Set the Group ID
Frequency Channel ：Set the Channels
Output Strength ：Set the output strength
Please
● Do not change the [Module Boot-up Mode] setting.
Leave it as [Auto].
6
Click the [Change] button.
7
Click the [Close] button to the
[Change Settings] dialog box.
8
Click the [Stop] button.
9
Click the [Close] button to the [WDS-AE
Hardware Setup] box.
10
After the settings are changed, turn the
power off , give about a 15 second delay, then
turn on the Transmitters.
4 Click
7 Click
6 Click
9 Click
8 Click