ARCHOS AV340 - Manual (Page 26)

26 27
Connecting/Disconnecting the AV300
1. Windows 98SE has recognized a new piece of
hardware (the AV300) and starts its wizard. Click on
Next.
2. Click on the button Search for the best driver. Open
up the CD tray on your computer and insert the
included Archos CD-ROM and then close the tray.
Now click on Next.
3. Uncheck all of the checked boxes, and then check
the box Specify a location. Type in the drive letter of
your CD player (usually D: or E:) followed by \Drivers.
Click on Next and Windows will then load the correct
drivers.
4. Windows will now copy from the CD to your
computer’s hard disk, all the fi les it needs to make
the USB connection operational. Click on Next to tell
Windows to install the driver.
5. Windows will indicate when it has fi nished copying
the drivers. Click on Finish. Do not unplug the AV300
from the computer yet.
Once fi nished, you should restart your computer. Upon
restart, it will automatically recognize the connected
device (the AV300). It will be seen as another hard disk
in Windows ® Explorer.