Mp3 sound codec, Using mpeg4 translator – ARCHOS AV340 User Manual

Page 40

Advertising
background image

40

41

Creating MPEG4 Video Files

MP3 Sound Codec

Remember, in order for the AV300 to be able to play the video, it must have an MP3

(MPEG layer 3) stereo sound track. If the source video file did not have an MP3 stereo

sound track then your destination file will have no sound. MPG4 translator will signal

this error condition. Obviously, it is pretty useless to have the video file without sound.

What you will need in this case is an MP3 encoder for Virtual Dub to use. There are MP3

encoders (usually packaged together as an encoder and decoder) available on the

Web for you to download. If you choose to use the LAME codec, make sure that you

have a version built with the ACM front-end. You can find other MP3 codecs on the

web by using the search terms ACM, MP3 and CODEC in your favorite web search

engine. Once this MP3 codec is installed into your system, Mpeg4 Translator will be able

to create final video files with MP3 sound, even if the source video file does not have an

MP3 sound track.

If you are unsure what codecs (audio and/or video) have

been installed on your computer, you can see the list, as

shown to the left, by going to the following location. Click

on Start > Settings > Control Panel > Sounds and Audio

Devices (Multimedia > Devices for Win98SE) > Hardware >

Video Codecs and then you will see a list which includes

the Video Codecs and the Audio Codecs which are

installed in your system. Decoding of MPEG 2 video files

is currently not supported by MPG4 Translator. These are

usually .mpg or .mpeg format files, not the required AVI

file. There are other tools found on the Internet (FlaskMPEG,

Rippack, etc.) that may be downloaded in order to help

you with these file types. A good starting place is the web
site www.digital-digest.com.

9.2

Using MPEG4 Translator

To the left you see the image of the main MPG4

Translator program. When you first run the program,

if the DivX™ codec has not been installed yet, you

will be notified. You should download the codec

and install it on your computer. If the Virtual dub

program has not been installed, you will also be

notified, and you should install it (either from the

CD or the Virtual Dub website). If you have placed

the Virtual Dub program in a folder other than the

default, it will ask you to locate the file.

Advertising
This manual is related to the following products: