PNI FieldForce Trax - Manual (Page 36)

PNI Sensor Corporation DOC#1016505 r06
TRAX User Manual Page 32
Show 3D Model
Selecting the <Show> button launches the 3D Model window, as shown below.
Clicking the <Start> button begins continuous updating of the orientation of the
rendered model, and of the heading, pitch, and roll output fields. The <Start> button
on the Test Tab screen and on the 3D Model screen are linked such that selecting
either of them will stop or start both screens.
Clicking on <Fullscreen> will expand the window to the full computer screen, and
the button will now read <Windowed>. Clicking <Windowed> will shrink the
window back down.
Output Format & North Reference
The “Output Format” and “North Reference” fields mimic the settings on the
Configuration Tab. To change these, return to the Configuration Tab, make the
change, then <Apply> or <Save> the change.
Background & Foreground Color
The foreground and background colors of the screen can be changed by the user.
Simply click on the color square and select the new desired color. The change in
color automatically is saved. The default is black lettering on a grey background.
Functional Mode
The TRAX can operate either in AHRS Mode or Compass Mode. While the TRAX
is intended to be used as an AHRS, there are times when it is necessary or beneficial