Test tab, Current reading, 3d model – PNI SeaTRAX User Manual
Page 35: Acquisition settings, 5 test tab
PNI Sensor Corporation
DOC#1018154 r02
SeaTRAX User Manual
Page 30
6.5
Test Tab
6.5.1
Current Reading
Once the <Go> button is selected the module will begin outputting heading, pitch and roll
information. Selecting the <Stop> button or changing tabs will halt the output of the
module.
Contrast
Selecting this box sets the “Current Readings” window to have yellow lettering on a
black background, rather than black lettering on a white background.
6.5.2
3D Model
The helicopter will follow the movement of the SeaTRAX and give a visual
representation of the module’s orientation, assuming the “Enable 3D Model Display” box
is selected on the Configuration tab.
6.5.3
Acquisition Settings
These indicators mimic the pertinent selections made on the Configuration tab.