Sterlco SSL and SSIL Series Hopper Loaders - Manual (Page 27)

27
Chapter 5: Series One Plus Controller Operation
The Series One Plus controller is an optional controller that includes the following features:
• Sensor-driven volume fill cycle to assure full load discharge for
each cycle
• Operator programming of blowback pulses to optimize efficiency
• Accurate fill cycle counts up to 9,999 on the batch counter to assist
in estimating material usage
• No Fill alarm with automatic shutdown notifies the operator of an
empty material source or lack of material flow; saves motor brushes
and reduces maintenance
• Proportioning capability
5-1 Pre-Startup Checklist
; Are all electrical connections correct, secure, and to code?
; Is the compressed air connection secure and safe?
; Is the hopper level and mounted securely?
; Are the flex hose and pick-up wand secure?
; Can the material discharge valve swing without obstruction?