Sterlco SIT Inventory Monitor Units - Manual (Page 9)

SIT Series
Inventory & Density Monitor Unit
9
Computer Control Panel
The computer control panel is normally mounted on the SIT Series frame and is
connected to the components with plugs.
The central computer is a modular embedded system controller. This design provides
excellent system performance along with an easily replaceable control panel in case of
failure of any computer or electronic component part.
The display and keypad menu format is very simple. After installation and setup,
simply enter in the proper recipe and start the unit.
If it is desired to have a local display and control of the unit at the operator station, an
optional RS485 serial communications RCP (Remote Control Panel) is available at extra
cost.
Stop at end of cycle Abort Cycle
Back Up key
(Recipe Adjustment)
Enter key
Start cycle key
Clear key
Numeric Entry keys