Acura 2010 TSX - Manual (Page 439)

Push a new bulb straight into the
socket until it bottoms, and
reinstall the socket into the light
assembly by turning it clockwise
until it locks.
Test the new bulb to make sure it
works.
Reinstall the light assembly cover.
Pull back the appropriate corner of
the trunk lid lining carefully. Open the trunk.
To replace a bulb on either side,
remove the two fasteners on the
left side, or a fastener on the right
side.
5.
6.
7.
1.
2.
3.
Lights
(in Trunk Lid)
Replacing a Back-up Light Bulb
436
FASTENERS
2010 TSX