Acura 2010 TSX - Manual (Page 95)

Each time you press the INFO ( /
) button, the screen changes as
shown in the illustration. Press the
INFO (
/ ) button until you see
the custom setting then press the
SEL/RESET button to enter your
selection.
You can customize the MEMORY
POSITION LINK setting in position
setup.
While ‘‘POSITION SETUP’’ is shown,
press the SEL/RESET button to
enter the customize mode.
All models except Canadian TSX with
4-cylinder engine
Position Setup
Multi-Information Display
92
: Press the SEL/RESET button.
: Press the INFO button ( / ).
2010 TSX