Help, Precautions – Audiovox PEQ-200 User Manual
Page 3
-3-
PRECAUTIONS
Monday - Friday
Saturday
8:30am - 7:00pm Eastern
9:00am - 5:00pm Eastern
1-800-645-4994
HELP!
IMPORTANT - READ THIS SECTION CAREFULLY
1. This unit does not contain a power amplifier and must be used with a
compatible external amplifier. The output of this unit is not designed for,
and is not capable of driving speakers directly.
2. The input of this unit operates at a low level (120 mV to 4.0 V) and
must be connected to the low-level (pre-amp level) outputs of the car
stereo.
CAUTION: DO NOT attempt to directly connect the speaker level outputs of
the car stereo to this unit or damage to the car stereo and/or
equalizer may result.
3. This unit is designed for 12V dc negative-ground electrical systems,
only.
SPECIFICATIONS:
Pre-Amplifier Input Level:
0.12V to 4.0V
Input Impedance:
10K Ohms
Frequency Response:
10Hz to 30kHz, +1dB
THD:
0.03%
Channel Separation:
Greater than 82dB
Signal-to-Noise Ratio:
Greater than 92dB
Maximum Output:
7.5V rms
Equalizer Frequencies:
40Hz, 150Hz, 400Hz,
2kHz, 10kHz
Cut/Boost:
+/-12dB
Subwoofer Level Control:
-6dB to +10dB
Crossover Subwoofer Output:
50Hz, 80Hz, 100Hz,
120Hz
Slope:
18dB/Octave
Rear Output:
80Hz,100Hz, 150Hz,
FULL
Slope:
12dB/Octave
Front Output:
100Hz,150Hz, 200Hz,
FULL
Slope:
12dB/Octave