TOHO ELECTRONICS TTM200 - Manual (Page 41)

41
Control setting mode (set4)
toho modbus
Screen
character
Name Command Remark
Identifier
Absolute
(DEC)
Relative (hex)
FA2 41099 044A FAL2 Set an auxiliary control anomaly RWLB
2TS 41133 046C tS2
Set an auxiliary control loop anomaly PV
threshold
RWLB
Pay attention to MODBUS
address.
2MS 41135 046E MS2
Set an auxiliary control loop anomaly MV
threshold
RWLB
Pay attention to MODBUS
address.
2PS 41137 0470 PS2
Set an auxiliary control loop anomaly PV
change threshold
RWLB
Pay attention to MODBUS
address.
LP2 41101 044C LoP2 Set an auxiliary control loop anomaly time RWLB
□C2 41103 044E C2 Set an auxiliary control sensitivity RWLB
CP2 41105 0450 CP2 Set an auxiliary control OFF point RWLB
FD2 41125 0464 Fdt2 Auxiliary control protection off timer RWLB
Pay attention to MODBUS
address.
ND2 41143 0476 Ndt2 Auxiliary control protection on timer RWLB
Pay attention to MODBUS
address.
PBB 41107 0452 Pbb Manual reset RWLB
□DB 41109 0454 db Set a dead band RWLB
RMP 41111 0456 RMP Set a lamp time RWLB
VLT 41113 0458 VLt Set a valve motor stroke time RWLB
VDB 41115 045A Vdb Set a valve motor drive dead band RWLB
ASP 41117 045C ASP Post-AT initial aperture RWLB