Brother MW-260 - Manual (Page 39)

39
ESC K 8-dot bitmap image (standard density)
[ASCII] ESC K n1 n2 data
[Decimal] 27 75 n1 n2 data
[Hexadecimal] 1B 4B n1 n2 data
[Parameters] 0≤n1≤255, 0≤n2≤3
In data, the image data is n1 + n2 * 256 bytes.
[Description]
Specifies that an 8-dot bitmap image (standard density) will be printed with the number of dot positions
defined by n1 and n2.
・ n1 and n2 indicate the number of dot positions. Specify their values as shown below.
n1: The remainder from dividing the number of dot positions by 256
n2: The quotient from dividing the number of dot positions by 256
ESC L 8-dot bitmap image (double density)
[ASCII] ESC L n1 n2 data
[Decimal] 27 76 n1 n2 data
[Hexadecimal] 1B 4C n1 n2 data
[Parameters] 0≤n1≤255, 0≤n2≤3
In data, the image data is n1 + n2 * 256 bytes.
[Description]
Specifies that an 8-dot bitmap image (double density) will be printed with the number of dot positions
defined by n1 and n2.
・ Specify n1 and n2 in the same way as with ESC K.
ESC Y 8-dot bitmap image (double speed, double density)
[ASCII] ESC Y n1 n2 data
[Decimal] 27 89 n1 n2 data
[Hexadecimal] 1B 59 n1 n2 data
[Parameters] 0≤n1≤255, 0≤n2≤3
In data, the image data is n1 + n2 * 256 bytes.
[Description]
・ Same as 8-dot bitmap image (double density).