Brother MW-260 - Manual (Page 5)

5
Chapter 1. General Information
1-1) About this Manual
This manual explains how to control the Brother MPrint series of mobile printers (hereafter referred to
simply as “MPrint”) directly, and to use this command interface to customize the output from your programs.
However, this manual should not be regarded as a programming tutorial. You should already have a basic
knowledge and experience of programming.
These ESC/P commands have been adapted specifically for printers.
Target models and interfaces:
MW-120 / MW-120 TypeF
 IrDA Ver.1.2 and USB 2.0 Full Speed
MW-140BT TypeE / MW-140BT TypeF
 Bluetooth Ver.1.1 with serial port profile and USB 2.0 Full Speed
MW-145BT
 Bluetooth Ver.2.1+EDR with serial port profile and USB 2.0 Full Speed
MW-260
 IrDA Ver.1.3, Bluetooth Ver.1.1 with serial port profile and USB 2.0 Full Speed
Target language version:
 Western language versions
Target Host:
 Any host which has any one of the above interfaces, which can control data output from your
program, and which can install and run your program, for example PCs, BlackBerrys, smart
phones, PDAs and hand terminals.
Updated history:
2010/02/26 Version 2.00 released.
Reference updated to apply to MW-120, MW-140BT, MW-145BT and MW-260.