Brother QL-700 - Manual (Page 33)

Brother QL-500/550/560/570/580N/650TD/700/1050/1060N Command Reference
32
6.8. Buffering Cooling Flow for Serial/USB Connection
Printer
Send a print command (print command with feeding (1A) for
the last page or print command (0C) for other pages).
Computer (host)
* Cooling start/cancel can
be performed multiple
times during printing.
Cooling
Printing
Send control code.
Send print data.
Send print data.
Printing 2nd page
Printing 1st page
Receives “Phase change:
Waiting to receive”
Receives “Phase change:
Printing state”
Initializes.
Initialize
Sending data for 2nd page
End process for printing 1st
Sending display
Printing display Printing
Receives data.
Status
(response status
to status request)
Status information request
Status (response status to status information request)
If there are no
problems with the
Printer status, the data
is transmitted. If there
is a problem, an error
is displayed.
Send control code.
Status
(Phase change :
“Printing state”)
Send print data.
Status (Printing completed)
Status (Phase change: “Waiting to receive”)
Status(Notification: “Cooling(finish)”)
Status(Notification: “Cooling(start)”)
Receives “Printing completed”