ALESIS DM5 User Manual
Page 8
6
Step 5: Attaching the extension poles
Now we need to add the “M,” “N,” and “O” extension
poles to the appropriate mounting points on the rack.
The locations of these poles are shown in the picture to
the left.
Step 6: Attaching the rest of the hardware
Finally, add the drum hardware (pads, pedals, cymbals,
and DM5 module) to the rack. You can mount the
DM5 module either above the main pole (as shown) or
below the main pole. Connect the kick drum pedal to
the bottom pole.
Your DM5 Drum Kit is now assembled and should look like the one below. At this point
you can adjust the height and position of the various components to suit your playing style.
If you wish, you can even re-arrange the drum pads differently from what is shown below.