Brother TD-4100N - Manual (Page 30)

ESC W Specify double width characters
[ASCII] ESC W n
[Decimal] 27 87 n
[Hexadecimal] 1B 57 n
[Parameters] n=0,1 or 48(“0”),49(“1”)
[Description]
・ Specifies double-width characters.
・ n = 1 or 49(“1”) specifies double-width characters.
・ n = 0 or 48(“0”) cancels double-width characters.
・ Double-width characters specified with this code is not cancelled with the DC4 or FS
DC4 code or line feed.
・ Canceling double width characters mode will also cancel half width mode.
[Example]
Code
ABC ESC W 1 ABC ESC W 0 ABC FF
Print result
ABCABCABC
30