Brother TD-4100N - Manual (Page 89)

ESC i a Switch command mode
[ASCII] ESC i a n
[Decimal] 27 105 97 n
[Hexadecimal] 1B 69 61 n
[Parameters]
n ：Command mode
0 or 48 = ESC/P standard mode
1 or 49 = Raster graphics
3 or 51 = P-touch Template mode
[Description]
・ Sets the command mode to ESC/P, P-touch Template and PTCBP (raster graphics).
・ These three modes can be switched dynamically.
・ Since this is a dynamic command, after the unit is turned off and on again, the setting
returns to the previously set value.
89