Brother TD-4100N - Manual (Page 51)

Vertical movement commands
LF Line feed
[ASCII] LF
[Decimal] 10
[Hexadecimal] 0A
[Parameters] None
[Description]
・ Feeds the paper by the amount set with the commands specifying the line feed amount
(ESC 0, ESC 2, ESC 3, ESC A).
・ The print position moves to the beginning of the next line.
・ The default value is a 48-dot line feed.
・ When a carriage return comes immediately after a line feed, the carriage return is
ignored.
・ Automatic cancellation of double-width characters with SO or ESC SO is cancelled.
・ Same processing as CR
FF Page feed
[ASCII] FF
[Decimal] 12
[Hexadecimal] 0C
[Parameters] None
[Description]
・ Starts the printing.
・ Data line of the characters and commands entered before this command is cleared after
printing.
・ At this time, automatic cancellation of double-width characters specified with SO or ESC
SO is cancelled.
51