Vt apply vertical tab – Brother TD-4100N User Manual
Page 54
VT Apply vertical tab
[ASCII] VT
[Decimal] 11
[Hexadecimal] 0B
[Parameters] None
[Description]
・
Moves the print position to the nearest vertical tab position down from the input position.
・
The next horizontal print position is the beginning of the line.
・
If the next vertical tab position exceeds the bottom margin, or if there is no vertical tab
position set below the current position, performing a VT is equal to performing an FF.
(Movement to the TOF position for the next page)
1
2
・
3
VT code
4
5
・
6
・
・
In the default state and when all the vertical tab positions have been cancelled with ESC
B NUL, performing a VT is equal to performing a CR.
・
Automatic cancellation of double-width characters with SO or ESC SO is cancelled.
Tab position
7
8
9
10
11
Tab position
12
13
14
15
Tab position
16
54
17
18
ＡＢＣＤ
EfghijkL
Abcdefg
ABCDEFG
aiueo
VT code
VT code
Line
feed
amount
Example: Vertical tabs are set to Lines 6, 11, and 15, and data is entered while VT is
performed