ArvinMeritor MERITOR TE9000 - Manual (Page 4)

4
TE9000 / 93000 Service
The Axle Identification Plate
Every axle leaving the ROR factory is fitted with an identification plate
which contains all the information needed to ensure the correct
replacement parts are obtained.
Identifying the Axle Type
All TE series axles are fitted with 10 stud, ISO 4107 spigot mount wheel
fixings and asbestos free Ø 420 x 180mm brakes as standard. Other
options are as shown below.
Table ‘A’
Axle Letter Exciter Ring Suitable
Code Type For
A 60t Pressed Steel Grau MGX2 & MGX2E
Bendix MD2 & MD2A
W 100t Solid Ring Wabco
Bosch
Grau DGX & MGX100
Table ‘B’
Axle Letter
Code ISO 4107 Wheel Mounting Type
MX M22 x 1.5p wheel studs for single steel wheels
MXA M22 x 1.5p wheel studs for single alloy wheels
Table ‘C’
Axle Nominal Highway Wall Max
Series Rating, Kg Thickness Offset*
90 9300 13mm 460mm
** 93** 9300 16mm 490mm
AXLE TYPE
APPROVAL No P 4 1 A B S 1 5 S T V Z O
WREXHAM LL12 0PB UK
ASSEMBLED IN THE EEC
SERIAL No. B999999 G94 0000
NOM CAPACITY 9300 Kg V MAX
COMB CAPACITY 9300 Kg 105 KM/H
T E
Anti-Lock Type
(Table A)
Steer Axle = S
Axle series loading
(Table C)
Type of wheel bolts
(Table B)
Q E S 1 0
Order Number Build Year
Build Month Non Asbestos Brake Lining Sequential Number
B
Identifying the Serial Number
The axle ratings shown are for normal highway applications and any
special application for installation must be approved by Meritor Design
Engineering.
Track – spring centres
* NB: Offset =
2
** For use with non Meritor air suspensions