Brother HL-4200CN - Manual (Page 14)

13
1
Push up button to open the front cover.
2
Push the button to open the paper outlet
cover.
3
Unpack the print head cartridge.
4
Pull the 4 seals firmly to remove them
completely.
5
Remove the protective packing.
6
Align the rollers of the print head cartridge
with the slots, and then gently lower it into
the printer.
7
Pull the protective sheet on the cartridge
straight up to remove it.
Note: Do not touch the transfer roller.
8
Close the paper outlet cover.
Close the front cover.
2 Install the Print Head Cartridge
If there is no circle on the end of the seal,
you can not use this print head cartridge.
Contact your dealer for assistance.
Front Cover
Button
Paper Outlet Cover
Tear off
Protective
Packing
Print Head
Cartridge
Seals
Check for a circle on the end of the seal.
■ Lowering the cartridge into the printer
without correctly aligning the rollers with
the slots can damage the cartridge.
■ Do not allow the surface covered with a
protective sheet to come to into the
contact with anything.
Protective Packing
Protective Sheet
Transfer Roller
Setting Up
Your Printer
W
ind
ows
®
USB
W
indo
ws
®
Pa
ralle
l
Win
dows
®
Network
Macintosh
®
US
B
Macintosh
®
Network
Fo
r
Administrators
Installing the
D
river