For administrators – Brother HL-4200CN User Manual
Page 36
35
■
For Administrators
Setting the IP Address Acquisition
Method to Control Panel.
1
Press .
2
Press
4 times.
3
Press .
4
Press .
5
Press .
6
Press .
7
Press
8
Press .
3 seconds later, an
asterisk appears.
9
Press .
Setting Your Printer IP Address.
Continued from the previous step.
0
Press .
A
Press .
B
Using or
,
set
the desired value (for
example 192).
C
Press and
move
the cursor to the next
value.
D
Repeat Steps
B
and
C
to finish setting
you IP address.
E
Press .
3 seconds later, an
asterisk appears.
F
Press .
Setting your IP Address, Subnet Mask and
Gateway (Using the Control panel)
Your printer is configured to receive an IP address, Subnet mask and Gateway address from a DHCP
server. If you do not use a DHCP server follow the steps below.
MENU
1:System
Menu
5:Network
5:Network
Ethernet
5:Network
TCP/IP
TCP/IP
Setup IP Address
Setup IP Address
DHCP *
Setup IP Address
Panel
Reboot System
to take effect
Setup IP Address
Panel *
TCP/IP
Setup IP Address
TCP/IP
Setup IP Address
TCP/IP
IP Address
IP Address
000.000.000.000
IP Address
192.000.000.000
IP Address
192.000.000.000
IP Address
192.168.001.100
Reboot System
to take effect
IP Address
192.168.001.100*
TCP/IP
IP Address