Brother MFC-9440CN - Manual (Page 44)

Chapter 4
28
Setting up the password
4
Note
• If you have already set the password, you
will not need to set it, again.
• If you forget the Memory Security password,
please call Brother Customer Service. (See
Brother numbers on page i.)
a
Press Menu, 1, 9, 1.
Security
1.Mem Security
b
Enter a four-digit number for the
password.
Press OK.
c
Re-enter your password when the LCD
shows Verify:.
Press OK.
d
Press Stop/Exit.
Changing your memory security
password
4
a
Press Menu, 1, 9, 1.
Security
1.Mem Security
b
Press a or b to choose Set Password.
Press OK.
c
Enter your four-digit password.
Press OK.
d
Enter a four-digit number for the new
password.
Press OK.
e
Re-enter your new password when the
LCD shows Verify:.
Press OK.
f
Press Stop/Exit.
Turning memory security on/off
4
If you enter the wrong password when
following the instructions below, the LCD will
show Wrong Password. Re-enter the
correct password.
Turning memory security on
4
a
Press Menu, 1, 9, 1.
Security
1.Mem Security
b
Press a or b to choose Set Security.
Press OK.
c
Enter the registered four-digit password.
Press OK.
The machine goes offline and the LCD
shows Secure Mode.
Note
If there is a power failure the data will stay
in memory for up to 4 days.
Turning memory security off
4
a
Press Menu.
Enter the registered four-digit password.
Press OK.
b
Memory Security is automatically turned
off and the LCD shows the date and
time.
Note
If you enter the wrong password, the LCD
shows Wrong Password and stays
offline. The machine will stay in Secure
Mode until the registered password is
entered.