Brother HL-5150D User Manual

Page 118

Advertising
background image

6 - 13 TROUBLESHOOTING

White Spots on black text

and graphics at 94 mm

(3.7 in.) intervals

Black Spots at 94 mm

(3.7 in.) intervals

If the problem is not solved after printing a few pages, the drum unit may have
glue from label stock on the OPC drum surface.

Clean the drum unit as follows:

1

Position the print sample in front of the drum unit, and find the exact position
of the poor print.

2

Turn the drum unit gear by hand while looking at the surface of the OPC
drum.

3

When you have located the mark on the drum that matches the print sample,
wipe the surface of the OPC drum with a cotton swab until the dust or paper
powder on the surface comes off.

Caution

Do not try to clean the surface of the photosensitive drum with a sharp
object.

The drum unit may be damaged. Put in a new drum unit. See Replacing the
drum unit
on page 5-9.

Examples of poor print
quality

Recommendation

94 mm
(3.7 in.)
94 mm
(3.7 in.)

94 mm
(3.7 in.)
94 mm
(3.7 in.)

Advertising
This manual is related to the following products: