Brother HL-5150D User Manual
Page 41
Advertising
ABOUT THIS PRINTER 1 - 34
2
Pull the paper tray completely out of the printer.
Figure 1-40
3
While pressing the blue paper-guide release levers, slide the paper guides to fit the transparency
size. Check that the guides are firmly in the slots.
Figure 1-41
4
Put transparencies in the tray. Check that the transparencies are flat and below the maximum paper
mark (
▼
). Do not put more than 10 transparencies in the tray at any one time, or it may cause a jam.
Figure 1-42
Advertising